Ghost Immobiliser Fitting
Secure your vehicle from key theft, cloning, and hacking by using the first aftermarket CAN-Immobiliser. With the option to link to a Ghost app and GPS tracking system that can send you alerts to call in the event that your vehicle is damaged with or stolen.
The installation of an Ghost immobiliser can be completed by a certified technician. Having the right tools, insulation tape and heat shrink tubing is crucial.
Getting Started
In contrast to physical security devices such as wheel locks or car alarms, ghost immobilisers protect your vehicle without the need of LEDs or key fobs. They connect directly to the ECU CAN data network, and can only be activated after entering a PIN code. This provides a more secure level of protection against key hacking, cloning, and even ECU swapping.
In the end, installing a ghost immobiliser Birmingham is a task that must be carried out with extreme agility and precision. It's like walking through the minefield. A single mistake could cause irreparable damage to the circuits of your vehicle's electrical system. To avoid this, it's essential to be aware of the process of installation and prepare your vehicle appropriately.
First, you must prepare the vehicle by removing interior panels to make room for the immobiliser device. Once you've found the perfect location to hide it and secure it with cable ties to keep it from being taken away or altered. Next, tidy up the wiring by tying loose wires and using insulation tape or heat shrink tubing to cover exposed connections. This reduces the risk of an accidental short circuit, while improving the aesthetics and reducing the chance of theft.
Find the source of constant 12V power as well as a grounding point for the ghost immobiliser. Once you've located them test the power cables using a multimeter. Connect the CAN H and CAN L wires of the immobiliser to the grounding and power points.
It is crucial to ensure that all connections are checked and examine the immobiliser to check for signs of corrosion. By entering a PIN and then starting the car is a great method of testing the system. This should be an ongoing part of your routine since it can help you detect any issues that might be intermittent early. Regular testing also helps to extend the life of the device, and keep it running at its peak performance.
Preparing your vehicle
The installation of an Ghost immobiliser can be a difficult task that requires tools and knowledge. A wiring diagram is necessary for finding the correct wires, establishing precise connections, and ensuring safety. A multimeter can be used to verify the electrical properties and ensure security. Cable tie and insulation tape can be used to secure the connections and protect them from being tampered with. Additionally, a user's manual will give you specific instructions specifically tailored to your Ghost Immobiliser model.
Once installed, a ghost immobiliser is able to stop unauthorised engine starts by requiring that the owner enter a unique PIN sequence by pressing buttons on the steering wheel or on the centre console. The code can be altered at any time by the vehicle owner, either manually or remotely using a mobile app. The device also operates silently and is unnoticeable to thieves as it doesn't emit radio frequencies.
A ghost immobiliser is connected directly to the vehicle's CAN bus, which is a network that communicates with all of the electronic control units (ECUs). It intercepts signals sent by the ECUs and stops the engine from running if the ECU detects a false signal. The system is weatherproof and tamperproof. It does not have keys or LED indicators that could draw thieves' attention.
It can be placed behind or in a more obscure area so that it's not visible to thieves, and won't hinder vehicle performance. It can even be mounted inside a small, compact box which makes it less likely to be discovered during a test drive by unscrupulous salespeople selling cars.
Its stealthy operation, combined with its integration into the vehicle's CAN-bus system, can be an effective deterrent to modern vehicle theft techniques like signal relay attacks and key copying. Combining the system with other security measures will create an effective barrier that will deter even the most persistent of thieves. A growing number of insurance companies recommend or even require ghost immobilisers, as they can lower the cost of insurance.
Making the Connections
Contrary to traditional security systems which can be heard by thieves, ghost immobilisers are silent and keep them from being aware that your vehicle has been switched on. They also block high-tech methods employed to steal vehicles, like OBD port hacking. Installing them without leaving permanent marks on your vehicle is a great option for those who intend to sell the vehicle in the near-future.
The Autowatch Ghost 2 CANbus immobiliser is one of the latest and most reliable solutions to stop car theft. It uses the CAN data network to disable your engine and generates a PIN code that only you know, meaning it's hard for thieves to detect. It can be used in various vehicles, and works with many features already installed, such as car alarms and steering wheel locks. GPS trackers and door lock bypass.
If you choose to install a Ghost immobiliser, be sure to consult the wiring diagram of your specific car model to identify the wires that need connecting. Double-check the locations of these wires to ensure accuracy and mark them with labels or tape to help you keep track of them. You will also have to locate a consistent power source (12V) for the system as well as the grounding. Once you have all the components, you can begin making connections to complete the installation.
If the ghost immobiliser is connected to the CAN bus, it will stop your vehicle from starting unless you enter a pin code through the buttons on the dashboard or the steering wheel. This will stop ECU cloning as well as other methods of theft of vehicles. In addition, it could be paired with other approved by Thatcham security accessories, such as alarms and tyre clamps to give your vehicle an even greater level of protection.
As ghost 11 immobiliser expands and expand, so do the options to secure your vehicle. With so many avenues for thieves to get in and steal your car, it's vital to do everything you can to protect it from being taken away. This is why ghost immobilisers are very popular among responsible car owners.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via the CAN network. This prevents the engine from being started until the PIN code is entered. This makes it extremely difficult for thieves to copy the key fob that you use to start your vehicle, and more difficult to disable the system through hacking its electronics.
Ghost Immobilisers can also be used with GPS tracking devices to help locate your vehicle if it is stolen. This is a feature that isn't often available in aftermarket security products, but it is an excellent way to improve the security of your vehicle and provide you with peace of peace of.
In addition to providing enhanced security and security, the Ghost-II immobiliser provides a simple user experience, removing the requirement for additional key fobs or devices. It is simple and intuitive PIN code entry that can be integrated seamlessly with your daily routine. autowatch ghost 2 immobiliser offers deactivation modes and convenience features that allow you to temporarily disable the immobiliser for valet parking or for servicing.
Before beginning the installation process, you should familiarise yourself with your vehicle's wiring and prepare the required tools. A basic set of hand tools will give you the ability to make precise connections, and a multimeter is a great tool to determine electrical values. Insulation tape and heat shrink tubing are also essential for protecting connections from short circuits, while cable tie can be used to keep the wiring in place. Lastly, it's important to work in a well-lit area and wear the appropriate safety equipment when working with electrical tools and components.
After you've completed the installation, you should test the Ghost immobiliser to make sure that it's working as intended. It is recommended to first start the vehicle without entering the PIN. If this doesn't work, you will need to try again and check the connections more thoroughly.
Unlike other security systems, the Ghost Immobiliser is a covert device that is not spotted by thieves and is much more effective than traditional deterrents such as wheel clamps or steering locks. It is TASSA-approved and recognized by a few insurance companies. This makes it a cost effective investment that will give you the peace of heart you deserve.