Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for the CAN bus. It is discrete, does not use LED indicators or key fobs, and is hidden within the vehicle's wiring.
It also permits the user to turn off the system temporarily by using Transport Mode to use it when they are renting out their vehicle. This guide will guide you through the steps of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a cutting-edge security device that protects your vehicle from hacking, key cloning and relay attacks. The system is connected directly to the ECU of your car and protected by a pin code that you choose. It is inaccessible to thieves using scanners for diagnostics or other modern methods, and it is unable to be disabled by cutting circuits.
The system is easy to use, however professional installation is recommended to ensure a clean connection with the ECU of your vehicle. An approved installer from Thatcham can assist in the installation and programming of your Ghost system. They can also suggest a tracking or alarm system to complete the protection package for your vehicle.
The first step is to disconnect your battery to prevent the possibility of airbag deployment and short circuits. Once this is done the installer is now able to begin work. Basic hand tools are useful for making precise connections and a multimeter can be used to test the electrical properties and safety. ghost 11 immobiliser and cable ties are also necessary for securing connections and keeping wiring neat. The user's manual gives specific guidelines that are specific to the Ghost Immobiliser model you have.
It is essential to choose a grounding location that is free of dirt or paint during installation. The installer should be sure that the immobiliser's H and CAN L wires are connected to the correct ports on the vehicle's ECU. These wires can be connected or soldered based on the model. A top-quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be turned on by the customer once the installation is completed. This allows valet parking or mechanics to use the vehicle without having to know the pin code. The customer must press the icon for service on the dashboard five times in two seconds. Once this is done the system will confirm with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's an excellent choice for those who rent out their vehicles often on platforms like Turo. An immobiliser can reduce insurance premiums, since it greatly reduces the chance of theft.
Getting Started
You won't have a problem using an autowatch immobiliser for those who want to safeguard your vehicle from theft. It protects your vehicle from starting even the theft or copies the key. This is due to its advanced technology that is designed to stop the car's engine from starting until the correct PIN code is entered.
The device connects to the vehicle's bus network, CAN which allows direct communication with the ECU. It uses the buttons on your steering wheel and dashboard to create a unique sequence, which only you know. This makes it impossible for anyone else to start your vehicle. This is the most secure way to protect your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing Ghost's immobiliser is straightforward, but you must follow the steps to avoid electrical problems and malfunctions in the system. You'll need to find a 12V power source and a solid grounding on the car's chassis. After that, you are able to begin to connect the wires that will be used to activate the immobiliser. Make sure to use high-quality connectors and soldering methods to ensure a solid connection. Also, make sure to cover the connections with heat shrink tubing or insulation tape to protect them from short circuits in electrical power and other issues.
Once the wires are connected, you can reconnect the battery and then turn on the engine to test the immobiliser's functionality. After you've confirmed that everything is functioning properly then you can put the immobiliser in a secure place inside the vehicle. Be sure to cover it well to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified this means it meets the highest standards of security and is a great protection against car thieves. It is a superior defense against key cloning, hacking and relay attacks, and can't be disabled without knowing the code. The device is also easy to use and is able to be put into a service valet mode so that your car will not be activated when you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and connects directly to the CAN bus. Contrary to other aftermarket systems which require the removal of circuit components The Ghost Immobiliser does not interfere with any of your vehicle's factory settings.
The system is also undetectable by thieves using diagnostic scanners. This is due to the fact that it does not transmit and receive radio frequency signals, and it utilizes the CAN data format to communicate with your ECU. Furthermore, it doesn't require any modification to your vehicle's existing key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition of your car and enter your sequence for disarming (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. After that, you are able to start your vehicle and drive off with peace of mind.
Once installed, the Ghost Immobiliser will protect your car from hacking and key cloning and will also protect the value of your pride and joy. In Transport Mode you can temporarily disable the Ghost Immobiliser if you need to hand your car over for service or valet park.
To complete the Ghost Immobiliser installation, you'll need to identify the source of power that is constant (12V) and a grounding point. Be sure that they are well-insulated and safe to touch. Cable ties are also recommended to secure the wires. This will reduce the chance of theft by thieves. Be sure to check the exact locations of these points to avoid committing a mistake, and mark them with the help of tape or a label. Verify all connections for signs they're wearing out. Loose connections can lead to problems with the system, so be certain that they are securely in place and properly insulated. Don't forget to test the Ghost Immobiliser after the installation is completed. This will ensure that the unit functions properly, and that all connections are secure and insulated. If there are any issues, be sure to address them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that integrates seamlessly into your vehicle's ECU to prevent unauthorised engine start. Its cutting-edge technology safeguards your car from key cloning and hacking and other typical tactics thieves employ to steal vehicles. The Ghost also works in tandem with existing alarm and tracking systems to provide the most complete protection for your vehicle. The Ghost's unique features, coupled with its secluded design makes it a sought-after choice for drivers who love cars and security-conscious drivers.
In order to ensure that the Ghost Immobiliser is properly integrated the Ghost Immobiliser, you must to follow the steps of the installation process. The best way to begin is to refer to the wiring diagram for your vehicle that serves as a guideline for locating and connecting the wires required. After that, you'll need identify the power source and grounding points. Once you have located them, you'll have to mark them to make them easily identifiable during installation. Finally, it's important to use top-quality tools and materials. Hand tools are a must to make precise connections while a multimeter can check electrical values and ensure security. Insulation tape and cable tie ensure that all connections are neat. A Ghost-specific user manual is also available.
It is crucial to test the system prior installing it. Enter the PIN code into the system and start the vehicle. This test will verify that the immobiliser functions in the way it was intended, preventing unauthorized vehicle starts. It's recommended to perform this routinely as part of your routine inspections of the vehicle to ensure the system is working correctly.
Once the installation has been completed, you can start driving your vehicle with confidence. The Ghost will keep your pride and joy secure from thieves who might steal it, ensuring that nobody can drive off with your vehicle without the correct PIN. The Ghost can be used in conjunction with an approved Thatcham tracker, which detects attempts to steal or tamper with. This lets you track your vehicle if it is stolen.
auto ghost immobiliser is compatible with a range of vehicles, including those from most major manufacturers. If you are interested in securing your car with this innovative device, call Monty's Locksmith today to find out more about our installation and maintenance options. We are a TASSA registered installer, which ensures that we adhere to strict standards in the installation of our products. This ensures customers as well as insurance companies and law enforcement agencies that all installations are performed safely and correctly.